Micky Ha-Ha


Power Point Safety Cover

Covers power points to protect wandering hands and helps prevent accidental unplugging.

Child safety – Micky Ha Ha power point covers reduce access of toddlers and children to active power points.

Super easy to install. Includes self adhesive strips that affix directly onto most smooth clean surfaces. Press down firmly over strips when installing. To remove cover press coloured tab and lever out. Simply click back into place to replace cover.

3 in stock



Put your childs safety first, with Micky Ha Ha’s Power Point Safety Cover, which prevents electrocutions, by stopping children from pulling out plugs, or turning switches on or off. Its the only product on the market that conveniently allows plugs to remain installed when in use. The cover will also cover some smaller wall plugpack chargers.

Two child-resistant catches and a rounded, all-clear design will provide piece of mind to parents. The universal design is compatible with all Australian standard-size single or double power points.

The Micky Ha Ha Power Point Safety Cover is also ideal for workshop areas where dust, dirt and sparks are a problem. The safety cover protects the power point and prevents accidental unplugging.



The two piece Micky Ha Ha Power Point Safety Cover fits over all Australian standard size single and double power points (Max 12cm W X 8cm H). Outlets in the cover exist to enable power cords to remain installed when in use. To remove the cover, hold down the tabs on both sides of the base to lever out. Simply click back into place to replace the cover.



Two self-adhesive tape strips are included and the base also has two holes so the base can be screwed into the wall. We strongly recommend using both the self adhesive tape and screwing the covers to the wall as the most sound installation method. The self-adhesive tape increases in strength over time so allow the tape to cure for at least 3 days before touching the base or attaching the cover to the base.

To attach, detach the cover from the base, peel off the outer tape cover and firmly press the base onto a dry, flat surface (not suitable for use on uneven surfaces or brick walls).

Insert screws into the holes in the top and bottom of the base and tighten with a screwdriver.

Additional information

Weight 0.3 kg
Dimensions 15 × 14 × 12 cm


There are no reviews yet.

Be the first to review “Micky Ha-Ha”

Your email address will not be published. Required fields are marked *